-
Precision CNC Machining5-axis milling/turning for complex geometries (e.g., thin-walled lens holders, 0.05mm wall thickness) — minimizing deformation via optimized toolpaths. -
Laser Cutting & MarkingClean, burr-free cuts for blade edges; permanent laser marking (logos/IDs) resistant to 96-hour salt spray and repeated sterilization. -
Surface TreatmentPassivation (316L stainless steel) for corrosion resistance; mirror polishing (Ra 0.02μm) for blood-contacting components (e.g., heart pump impellers). -
Heat TreatmentControlled hardening for 4Cr13 scissors (HRC 50-58) to balance sharpness and toughness; stress relief for 3Cr13 forceps to prevent fatigue failure.
General Surgical Tools
Scissors (420 stainless steel, HRC 48-56) with continuous edges (no burrs under 50x scope); hemostats (316L) with 96-hour salt spray resistance.
Robotic End-Effectors
ARTHROBOT hip replacement grippers (titanium alloy) with optimized thread clearance to eliminate jamming; laparoscopic forceps (PEEK) for lightweight flexibility.
Implant-Related Components
Heart pump housings (316L) with mirror-finish inner walls (Ra 0.02μm) to prevent thrombosis; guide frames with ≤0.01mm deformation.
